Home› Modelling

Modelling

Discussion List

Topic
Replies
Latest Post

3d Realistic Glass Water Blender Modeling Tutorial

https://youtu.be/h7z2aPhInfw
1 Last
Metutget

Jaguar XJR9

Hello any feedback and critics are welcome. This is an incomplete project, but due to time, carelessness,  and limited computing resources some things like the faulty proportion of the roof comp…
6 Last
alfonzx

Hard Surface Blog: Sci-Fi Processing Station

[{"insert":"Hey PC! \n"},{"insert":{"embed-external":{"data":{"url":"https:\/\/us.v-cdn.net\/5021068\/uploads\/O0M151250FM4\/render14.png","name":"Render14.png","type":"image\/png","size":16831772,"w…
14 Last
mpuLse

How would I add a bevel in normal map only?

I’m modeling a low poly bed wood frame, and I would like to add a edge bevel in the normal map only.If the wood frame was perfectly straight I’d use a trim sheet for the normals to achieve that perfe…
3 Last
Eric Chadwick

RIGHT "flow and behavior" of UV's

Good time, comrades! I'm on way to create 3d character and now i'm on phase, where i must create UV map for my subject. So, cause i'm self-taught, I watched and read a lot of information about IT, bu…
5 Last
Kkyc

Volvo XC60 bumper tow hook cover 3D Model???

Hello,I recently have had a friend approach me telling about an unfortunate rear ending he experience a week ago, but luckily the only damage evident was the Bumper Tow Hook Cover coming clean off. H…
1 Last
sacboi

[CLOSED] 3D armour modeler wanted to edit a pair of Gauntlets

Hello all, I am looking for a 3D Modeler who can edit a pair of gauntlets of a personal character of mine. You will be adding a few screws, a grove, and angling a part of the gauntlet. If you have…
0 Last
J6_

how would I close the holes in these shapes in Zbrush?

I'm trying to close the holes for these shapes so the red shape becomes its own block and the orange shape becomes it's own block. How would I do this? I think my topology is too messy to use zmodele…
2 Last
kanga

Creature personal project (Barlgura)

Hey guys I was wondering if I could get some critique on this please?
8 Last
zetheros

Most efficient strategies for texturing modular architecture assets?

[{"type":"p","children":[{"text":"Hey Polycount. \nI have been researching this topic for a while now, and I know that there are normally multiple ways to go about it. The context is that I'm practic…
5 Last
poopipe

[WIP] Audiocomic YT- Trailer

[{"insert":"Hi, Guy’s. I am a newbie. I'm here because I wanna make a professional trailer for my adio YT comic. I uploaded my first comic teaser- via my youtube channel. And now I wanna turn them in…
1 Last
StephanBored

Modelled a Table

[{"insert":{"embed-external":{"data":{"url":"https:\/\/us.v-cdn.net\/5021068\/uploads\/4G9K61UZDWHK\/table-png.png","name":"Table.PNG","type":"image\/png","size":72878,"width":729,"height":472,"displ…
7 Last
KidoUmi

(WIP) Feedback for improving my character render

[{"insert":"Hi! I want some feedback for a character I've made, I'm struggling with lighting and also with the hair system of blender, it seems so thin. All feedback is welcome! \n"},{"insert":{"embe…
0 Last
SaraSanchez

[WIP] A scope a day keeps the optometrist away.

[{"insert":"Wanted to sharpen my modelling and hard surface skills so decided to make 1 weapon scope every day for 7 days and then create low poly versions for game assets!\nTrying to make the high p…
6 Last
SimãoSilva

Advice on this topology problem? (Converging hard and soft edges)

[{"insert":"I am trying to create perpendicular edges partway through a square-ish shape. I want one edge to be soft, and the other sharp.\n"},{"insert":{"embed-external":{"data":{"url":"https:\/\/u…
8 Last
MatCGI

[WIP] Princess Mononoke 2.0

[{"insert":"Hi guys! I'm very excited to show you the process of my 3d model. \nThe concept artist is "},{"attributes":{"link":"https:\/\/www.artstation.com\/jude_smith"},"insert":"Jude Smith"},{"ins…
2 Last
oh_holymary

How much does "clean topology" matters on lowpoly?

[{"insert":"Hi!\nWhile working on my recent project, I begin to wonder, does \"clean\" topology matters at all if it's a low-poly asset that uses normal maps?\nFor example:\n"},{"insert":{"embed-exte…
4 Last
Kligan

How to do this in maya?

[{"insert":"\n"},{"insert":{"embed-external":{"data":{"url":"https:\/\/us.v-cdn.net\/5021068\/uploads\/DF19CI044BBS\/extrude.gif","name":"extrude.gif","type":"image\/gif","size":3959066,"width":1555,…
3 Last
voidseeker0_1

Rendering Overlapping Model Pieces

[{"insert":"Hi, I hope I can explain my question correctly. I am trying to render out images of individual pieces of my model, importing them into photoshop and doing some post-processing on the diff…
1 Last
EarthQuake

[PAID] Ancient buildings and props modelling and texturing

EDIT: From today (16.07.2021) we no longer accept new applications. Current applicants will receive more information next week. Thank you all!Hi!My name is Krzysztof and I'm helping President Studio …
0 Last
KSatPresident

WHEN TO USE CREASE vs EDGE LOOP SUPPORT

Sometimes I create an edge loop and then have to recalculate the incorrect toplogo angle after bevel or Multip cut, then have to recalculate the Edge Flow. So sometimes I use the Crease tool again. H…
6 Last
Ruz

3D Typography Topology Study

Critique and Feedback on 3D Typographic Topologies 
11 Last
Hitprady

Help on some modelling

Hi! could I get some help on how to approach this? I start with a smoothed cube, sort of a watered down sphere and then used the multi cut to create the details that i would carve out, sadly the edge…
8 Last
lenteja

3D Victorian House Model [WIP]

Hellooo,I was hoping if anyone was available to offer some critique and help with a current model I am working on for my portfolio. I've only recently gotten into Maya as part of my degree so some fe…
0 Last
Dolypsy892

How does this function?

So as per suggested in a previous thread I found and looked at this overwatch character. The place I got it from said it was an original from the game but when I looked at the model I noticed that it…
5 Last
Neox

[Maya] Modelled a shoe. How do I make the inside not have black /become double faced? +pics included

So I am following this tutorial: https://youtu.be/RM417cyk1X0?t=87I ended up with this. I wanted a sole so I tried to bridge edges but they don't work. I have tried extracting the shoe wall…
2 Last
vdmdx22

Hard surface modelling advice for a basic shape

I am quite new to 3D and I am trying to model this quite basic fastening component as part of a larger model.I am trying to create a sort of blunt bullet shape, which is flat at one end. I also need …
2 Last
Eric Chadwick

Car Modelling Workflow?

I am creating my first vehicle, and several people have told me i am not approaching it right or using the correct workflow. I've watched a couple car modelling timelapses and I guess i am just dense…
4 Last
sacboi

Looking for a skilled hard surface modeller for SciFi war game (Project Quaternion)

Title says it all. I'm looking for a hard surface modeller for my Scifi F/TPS war game. I have the concepts, gameplay, and some of the mechanics ready, I just need someone to make the assets. Unfortu…
3 Last
PremRastogi

[PAID] Freelance Character Modeller Mini-Job

Hello,Aventuresof is looking for a 3D artist preferably specializing in character modelling and topology for a small job.We require two characters to be retopolized and UV'd, and baked down to low-po…
0 Last
Adventuresof

[Finished] "Hand of Damnation" - Stylized Revolver

Hello guys!I would like to start this topic for a new project I would like to make from start to finish so this thread could always help me advance forward.So here's my initial sketch, which I will r…
8 Last
Alander787

Games Jobs Live this Weds; FREE online livestream with hiring Montreal studios

Games Jobs Live on Weds 16th September; a FREE online livestream with Montreal, Quebec based dev studios all looking to hire!The livestream will feature presentations from Rovio, Mistplay, Paralives,…
0 Last
scottishcolin

Turn a Kit-bash concept into a video game ready prop ?

Hello everyone. I hope you are all doing well. In this post, I wanna ask about the process of turning a kitbashed-concept art into a game-ready prop. The mechanical guts of the drone (see i…
3 Last
Alex_J

How would you approach modelling this?

Should I combine both Boolean And SubD workflow?I have something half done, but some tips from you guys would be helpful.
7 Last
Alander787

Tantive IV - Star Wars Fanart

Hey Ho,  It took me forever, but I'm finally done. Here is the Tantive IV I've modelled in 3D.  I tried to keep it as close as possible to the original model.  For more renders, check …
2 Last
Polynaught

Share Your Tutorials and Tutorial Websites / Books

Hey, I am currently searching for some more advanced tutorials websites and step by step 3D related courses, to improve my skills. I think it would be useful to share some websites for courses and ge…
4 Last
VanessaCeline

[Freelance] 3D Character Artist - Stylised to Realistic Sculpts

My name is Cam Harper and I specialise in character models and portraits. Below are some recent examples of my work. If you feel I would be a good fit for your project or brief, contact me here: camh…
0 Last
CamHarperArt

What keeps your motivation going during big and long projects?

Hello.Two weeks ago I started working on a spaceship for the CG Boost challenge and I didn't finish it in time, however I still want to, but after some time I don't feel motivated enough. When I'm wo…
8 Last
Biomag

How to make a small income from 3D modelling?

Hello again, people!In recent months I've been struggling with getting some proper work associated with 3D, so I've came here to ask you.How do you make generate income from 3D modelling/texturing/pa…
5 Last
Alex_J

Floral Vampire (WIP) (first serious project - help welcome )

I've been modelling for a while but this is the first time I tried a fully "how should it be done" project, I also doubled it as an attempt at character design. The objective is to make some sort of …
0 Last
DrTowers

Sketchbook: 3D Self Portrait

Sup everyone! It's been a while since I've been doing 3D work (Stacking shelves and am a graphic designer atm, gotta pay those bills!)So I'm working on a self portrait in january (an hour a day). It'…
0 Last
Cybersam

[need some feedback] [Blender] Birth of an Electromancer

As a Max user I am slowly trying to learn Blender, and thought I would be a little creative while doing so Blender.Here is my "Birth of an Electromancer" low sampled renders from Blender.I like the a…
2 Last
Zoddo

Start selling your Designs as physical prints! Shopify API/Plug in 3D Printing

Hi all,I hope you are all well and happy holidays! This post is basically for those looking to set up their own 3D Printing business.Sign up for our FREE Shopify Plug in and you upload your designs (…
0 Last
3DCCF

[WIP] Ollie, quidditch player - Critics needed

Hi there! It's my first time posting here so, I'm hoping to not do any mistakes.Feel free to critique, help, give tips and advices ! Thank you so much, it's really appreciated ! So let me present to …
5 Last
Marinc

LANZ BULLDOG (Highpoly)

Highpoly Created in 3ds max and Zbrush I couldn't find any Blueprint  or side view for this so i  took a screenshot from a Youtube Video  . :) My Artstation - https://ww…
2 Last
shubham kumar

3D character artist looking for any 3d related job

Hi!I'm a passionate 3d artist that specializes in 3d characters and props but can do other 3d related tasks too.  I can model both organic and hard surface models and have knowledge in rendering…
2 Last
dlz

Spline/Surface modeling utility and when to use ?

Like the little suggests whats is the best use of techniques such as spline/surface modelling ? I regularly use splines for modelling, using sweeps and extrudes, never really used them in this way, b…
2 Last
SimãoSilva

[PAID] Create scene from existing model and convert to glTF

HelloI'm looking for someone who will assist me in creating a scene from an existing 3D model. I'm a web developer and need to render this scene using three.js in glTF format. Unfortunately I have no…
0 Last
edmaster

KH Chakram model: Looking for critique

I have made this Chakram (from Kingdom Hearts) as a test. I would like to get a critique of this model and some advice. I want to improve on my texturing.
3 Last
Soukillaz

Feathers on weapon for FPS - Geo or 2D plane?

First off, hello everybody, my name is Liam O'Hagan and Im a Junior 3D Artist from Toronto, Canada. This is my first post here, so I apologize if it isnt in the correect spot. Now, to my question.I a…
1 Last
Eric Chadwick

Popular Tags