The BRAWL² Tournament Challenge has been announced!
It starts May 12, and ends Sept 12. Let's see what you got!
https://polycount.com/discussion/237047/the-brawl²-tournament
It starts May 12, and ends Sept 12. Let's see what you got!
https://polycount.com/discussion/237047/the-brawl²-tournament
Misc hard surface stuff
polycounter lvl 8
Hi guys!
Here I'm gonna post some stuff I make.
This is Basler BT-67 of canadian Kenn Borek Air Ltd, a modern turboprop version of classic DC-3.
10488 tris, 2048 maps
Here I'm gonna post some stuff I make.
This is Basler BT-67 of canadian Kenn Borek Air Ltd, a modern turboprop version of classic DC-3.
10488 tris, 2048 maps
Replies
Not sure why you haven't gotten more feedback in here. You should drop some shots in "What are you working on 2014" as well, With a link to this thread. In attempt to increase traffic
Plane looks on point. Don't have much to say in regards to it. Nice clean texture/shader style and it looks nice.
On the GAZ, The wood could use some love. A lower gloss value on the cab paint combined with a higher gloss and higher spec value for the wood paint would work well I think. Separating the paint from the bare wood underneath and separating the cab green from the wood. Having the OD green more matte on the cap would contrast nicely with the fenders as well.
To create additional separation, Using your wood paint layer mask (assuming you are using one) make a black and white image of just the bare wood, and the wood paint. White being high (the paint) and black being low (the bare wood), Then run this image through the NVidia filter or run it through Ndo to create a normal map overlay. In the layer style options, under blending options, You can disable the Blue channel and set the blend mode to overlay. This will retain all your other normal map data, and add detail to the wood.
Keep up the good work ^^
I really got used to offline renders so tweaking glossy-spec values for realtime engines is a bit tricky and sometimes feels comlpletly random to me. I should dig it.
(I don't like the black holes in last car's wheels.)
High poly clay render.
It took 48 hours (6 eight-hour days) to make s-400 model, including searching for references. And I really forgot to turn on smoothing on rear bed
The only crit that I have is that the material on the Kriegslokomotive is pretty flat, which makes the details hard to see, especially around the wheels/mechanical bits at the bottom.
Keep it up, I look forward to seeing more.
There is not much to say about my work process though. I'm currently trying to figure out the best way to deal with materials. Currently I tune specular in photoshop which is tedious and slow process. Really looking forward PBR painting in 3dcoat, which I hope will emerge later this year. Or substance painter if 3dcoat won't work out.
As of game engine we have our own old inhouse engine in which these models look pretty awful
I wish I had some time to get my hands on UE4.
About 14000 tris
2048 maps
Seriously some fantastic art! Keep up the great work! MORREEE PLZ!!!
Just some ideas. again; Awesome stuff man!
But I'll consider this in future.
A few of these were built, and some of them are still in use! Each one has it's own very distinctive look because of lots of repairs and field modifications.
It's based on the chassis of the famous T-54 tank.
Any chance for rear view?
...and maybe wires? And UVs?
And wires.
yes. All the gifs...
Theres just something on the truck and on the snow mobile, those painted depths totally destroy the illusion for me. On the truck the black shadow spots on the tires and the fake holes on the snowmobile tracks. If you look at the top of the truck alone its looking great and pretty realistic, but the tires drag it down a lot
The same for the snowmobile.
The worst piece is always setting the standard
I know its no easy challenge on the snowmobile without compromizing the poly count
but maybe you could make bolts there instead of holes or consider something else
in a future object or just use more polys (for what are you doing those anyways ?)
keep up the good work!
I know what you are talking about. I tend to leave more AO and lightning information in diffuse texture than really needed. Thank you for pointing this out, very helpful, really.
Not sure what you mean by making bolts instead of holes. I have to stick to the real thing. No fantasy stuff.
These models are all commercial work so sadly I don’t have time to polish things out. Most of them are made in a week or less.
ghaztehschmexeh
I used pictures of BTM-3 as reference because there is very little pictures of antarctic vehicle.
Good luck with that digging mechanism