Home 3D Art Showcase & Critiques

LOW-POLY ART

polycounter lvl 19
Offline / Send Message
Pinned
hawken polycounter lvl 19
This is the sweet spot for your low-poly models. Post 'em if you've got 'em!

Low-poly hasn't really been a requirement in the games industry for a long while now. This thread is for low-poly art style appreciation, so please take note of these rough guidelines:
  • Keep models under 1,000 triangles.
  • Scenes are fine, if all models are low poly.
Some dedicated low-poly modelling tools now exist that make this art style a lot easier to produce; Crocotile3D & Blockbench

Here's a handy list of ways to make your art look right in mainstream 3D software: Low-Poly Art Style Guide

Replies

  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    Here's a monkeybike I did a few years back (in gmax!) for a bit of fun, if it helps anyone.
    I should definitely revisit this!

    mkb_left.png
    mkb_wire.png

    more:
    http://dadako.com/forums/mkb_right.png
    http://dadako.com/forums/mkb_scale.png

    Although I made it a while back some of the key principles to budgeting your triangles still count: (the budget was 1024 tris)

    1. Maximise your detail on the tyres, spend as many polygons as you can here. Beg borrow and steal geometry from around the bike to feed these hungry beasts. This is the area that will get the most attention, as they move and the eye is naturally drawn to them as they spin.

    2. Remove any detail that doesn't add to the silhouette of the bike or can be done just as well in a texture. You don't need to model that brake cable when a 6 tris plane can do the same job. That tiny bit of metal that connects the shocks or pedals, is it ever seen?

    3. Floating geometry is king. Stick pipes into planes, tubes into tubes. Geo doesn't need to be connected, you can save huge amounts of triangles here. The focus is the end shape and not the geo flow.

    4. Try to remove as many curves out of your pipes as possible. Only curve when it adds to the silhouette. As you can see above, I could have collapsed that one loop in the middle of the long part on the handlebars and saved a whole bunch of tris without changing the models appearance.

    5. Reference regularly, make sure it can be ridden by your player model.

    6. Try to avoid "dirty modelling" - the bike is not a table, it will fall over. If the under part of your seat was deleted due to saving 2 triangles, that's going to look weird when seen.
  • Tigerfeet
    Offline / Send Message
    Tigerfeet polycounter lvl 12
    Rapante wrote: »
    it would need to be a texture with soft alpha - which is a performance hit for most lower end devices; as a plus a soft alpha adds quite a lot of a memory impact for those devices (somehow not true for some PowerVR based chipsets :shifty:). so it'd both lower the FPS (and I had my fair share of shit coming along when doing UIs with alpha on iOS devices

    O-oh.... :shifty::shifty::shifty: *ninja-delete-headlight-shine*

    In other news, I love seeing these low-poly bikes! I don't know much about bikes, but I do definitely appreciate sexy machinery. :D
  • Fomori
    Offline / Send Message
    Fomori polycounter lvl 12
    Damn! Think I might have to join in with this low poly motorbike thang. Inspiring.
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    Delko wrote: »
    puch.png
    A moped, awesome! Have you thought of what kind of style you're aiming for with the rider model? If I may suggest points of improvements, as hawken said: you should try to make the bike a bit more wider, too. Especially the tires look too thin.

    Are you going get rid of that mirror line in the middle of the chassis when you get your model finishded? Because I think you should do that. The middle line is giving nothing to the profile of your bike, so it would save tons of tris there and you could spend them to something more important.

    Also I'd prolly do something for these:

    fffvk.jpg

    And first I thought I saw some unnecessary edges in the engine department, but then I realized the engine is just made of overlapping parts, am I right?

    Good work anyways!

    __________________________________________

    @leilei That torch is looking good :) It's yelling for animated fire!
    __________________________________________

    @wildmax Nice solid start there! I'd triangulate the sides of the petrol tank to make the shape more natural (that one quad there seems to "stretch" out a bit too much).
    __________________________________________

    @Rapante Haha, squirrel on dope.. And I'm messing up all my nuts 'cause of dat.

    Oh wait, what was the analogue again... :poly141:

    About the cabin, I may have some kind of texture to show later today.
    __________________________________________

    @hawken Thanks for the comment! And yea I should raise the fender – again. Last update wasn't 'nuff I see.

    And what browser do you watch the gif with? One other dude also complained about not seeing the gif properly (on dA). I'm using Firefox 7-something it is working as supposed to. I also tested it on IE8 (eeeeeeeeeew, I had to use IE! I had to watch porn for like 2 hrs just to clean up my head from that kind of carbage >_>) which seemed to work "fine" if you don't count in the slooooooowwww FPS of ~8-10 or something.

    Guess I should do another test with Google Chrome.
    __________________________________________

    @hawken Oh and about your bike: is that your entry for this bikefest? It's looking good... Wait! Is that... Is that...

    ... AN N-GON ON YOUR BIKE'S GAS TANK!? My god :D

    Also is there somekind of fancy reflection stuff going on with the shiny parts of your bike, or is it just cleverly textured?

    ALSO, I agree with the points you made in that post. Especially the 1. and 3. one. My first thoughts were when I started modelling my own bike was "I seriously got to make those wheels look chubby".

    Cuz I looove it chubby.
    __________________________________________

    @Tigerfeet You are just like the ninjas from old movies. They always yell right before they perform the sneak attack :D

    __________________________________________

    @Fomori You are OBLIGATED to do so! Now at least.
  • Delko
    Offline / Send Message
    Delko polycounter lvl 16
    Thanks for all the crits guys, I think Ive got it sorted out now. I still haven't removed the symmetry lines tho, so just that into account.
    puchm.png
    9hpglf.jpg
    @9skulls
    haven't really thought about that yet. Its a pretty small bike IRL, so ill probably have to go with lankier proportions compared to what everyone else is doing.
  • Rapante
    Offline / Send Message
    Rapante polygon
    Delko wrote: »
    Thanks for all the crits guys, I think Ive got it sorted
    I was going to post a nice turn table animation, but apparently 3dsmax cant do a shaded wireframe render without having vray installed, so meh.

    it can! but unfortunately not by rendering it. Go to your "animation" dropdown menu and choose "make preview"

    you won't be able to render directly to a gif, but you'll be able to render single frames and put them together in your image manipulation app of choice!
  • Delko
    Offline / Send Message
    Delko polycounter lvl 16
    thanks, that did it!
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    @Delko Looking great :)


    Here's the texture WIP for my arcade cabin:
    ac-turntable-v3.gif

    Oh what's the inspiration behind that, you ask? I'm glad you asked! I am trying to combine – succesfully – this, this and this.
  • felipefrango
    Offline / Send Message
    felipefrango polycounter lvl 9
    Ooh, I like the glow effect on that turntable 9skulls, how did you do it? Also, great bikes everyone, specially Rapante, awesome texture work as usual.
  • renderhjs
    Offline / Send Message
    renderhjs sublime tool
    nice stuff on the last 2 pages- maybe I should make a bike as well
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    Ooh, I like the glow effect on that turntable 9skulls, how did you do it?
    It's just some Blender magic with nodes. I may get rid of it for the final version since it doesn't really add as much to the overall look as I tought it would.
  • Harry
    Offline / Send Message
    Harry polycounter lvl 13
    are the bikes part of an event or challenge? I'd like to participate, and i know just the bike i'd like to make.

    as for me i'm doing some tweaks to lighting and environment in dicta. I think it's starting to look more natural.

    Since i've posted in this thread we've also implemented morph targets, so the early planes without ailerons properly warp their wings :D

    Cloud distribution still sucks. That's the next thing I hope to revisit.

    natch.jpg
  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    9skulls wrote: »
    And what browser do you watch the gif with?

    Just webkit (safari / chrome) - I think it would be safer to remove any transparency & loss on export)
    9skulls wrote: »
    Oh and about your bike: is that your entry for this bikefest?
    What bikefest? Nah, I modelled that back in 2003... I have the file in MAX format but am now on a mac, no way to open it.


    Maybe it's time for a bike challenge.
  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    bike and rider? Budget 2048 tris for the lot?
    Textures? nothing over 256x256?

    or Strictly 1024 tris for the bike?
  • Harry
    Offline / Send Message
    Harry polycounter lvl 13
    1024 tri bike 256x256 texture sounds grand to me
  • Maph
    Offline / Send Message
    Maph polycounter lvl 8
    Great work on the last few pages guys! Rapante, you sir have some serious low res texturing skillz. Did you make that texture the olde pixel painting way (ie. one pixel at a time)?

    9skulls: Gorgeous bike and cabinet! I'm actually building an arcade cabinet for reals so I'm biased, but yours rocks mah socks.

    Edit: this bike thing is pretty tempting, I've been dying to do some more LP work!
  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    OK I'll set up an official thread in the challenges forum, however that part of polycount gets very little love so you're fine to post here too.
  • Mr_Drayton
    Offline / Send Message
    Mr_Drayton polycounter lvl 14
    Oh snap, is this bikefest going to be a contest? Awesome, polycount me in.

    Well, there's already the "manifesto" of it... :D
    9skulls wrote: »
    Hey, YOU!
    __________________________________________________

    Feeling lonely?

    Don't quite have as many vertices as your neighbors?

    Don't know what to do with your polys you got when your
    ex-wife left you for another bandit?

    Then you might just be the badass outlaw
    prospect we have been looking for!


    EdgeSplitterzMotorClub-gif1-v3.gif

    Join US!
    __________________________________________________

    Join us, the most hardcore 1% low poly motorbike club ever,
    EDGE SPLITTERZ and get ready TO CAUSE SERIOUS MAYHEM!
    Compared to us, Garmageddon is going to look like a sunday
    trip to grandma's!

    YOU MAY NOT HAVE AS MANY POLYS AS YOUR NEIGHBOR,
    BUT GOD HELP US, THE LITTLE YOU HAVE,
    THEY ARE ABOUT TO KICK ASS MORE THAN MUHAMMED ALI EVER DID!
  • Fomori
    Offline / Send Message
    Fomori polycounter lvl 12
  • Rapante
    Offline / Send Message
    Rapante polygon
    Maph wrote: »
    Great work on the last few pages guys! Rapante, you sir have some serious low res texturing skillz. Did you make that texture the olde pixel painting way (ie. one pixel at a time)?
    !

    thanks Maph! Yep, I did the texture the old way :) though I "cheated" a little with some gradients for shading, but the main detailing is all hand pixeled :)
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    Maph wrote: »
    I'm actually building an arcade cabinet for reals so I'm biased, but yours rocks mah socks.
    WAAAAT, for real? You're making some kind of MAME cabinet? Do you have WIP blog or anything where I could follow your progress? I've had the same idea for about 6 years now of making my own cabin, I just never got the time to design it :/

    __________________________________

    @hawken It's a great idea, but I am afraid that as soon as you make this "official" ppl will fleet the same second :D You know, Murphy's.

    But if you are going to set down some rules, I think 1000-1100 tris for the combined biker + motorbike is about the correct limit. That and texture size of MAX 256² for each model.

    :poly145:
    __________________________________

    Mr_Drayton wrote: »
    Oh snap, is this bikefest going to be a contest? Awesome, polycount me in.
    HAHAHAHAHA I love what you did thar :poly142:

    __________________________________

    @Rapante Yeah but the gradient trick was brilliant. It added so much depth to the texture without making it look too hi-res or anything.
  • skylebones
    Offline / Send Message
    skylebones polycounter lvl 10
    hawken wrote: »
    OK I'll set up an official thread in the challenges forum, however that part of polycount gets very little love so you're fine to post here too.

    I would be so down with this!
  • Harry
    Offline / Send Message
    Harry polycounter lvl 13
    so are we shooting for 1024 tri overall? rider required? I'm not so keen to do a rider 'cause the bike i'm doing will look better without one but...
  • Maph
    Offline / Send Message
    Maph polycounter lvl 8
    9skulls wrote: »
    WAAAAT, for real? You're making some kind of MAME cabinet? Do you have WIP blog or anything where I could follow your progress? I've had the same idea for about 6 years now of making my own cabin, I just never got the time to design it :/

    [THREAD HIJACK]
    Yip, for reals. And it's a MAME cabinet based on the MK2 design. It's actually my mate's cabinet, but we've talking about this since our childhood basically. I also started building custom joysticks for the PS3 as well whenever I can find the time.
    We can only work on the cabinet sporadically, but the side panels are all cut out, next up are the back, front and top panels and the control panel.

    Blog wise, that mate of mine started a blog about it yes, but it's in Dutch. I'll look into creating an english one when we're done. :)
    But here are two pictures anyway!
    http://dl.dropbox.com/u/7460156/MameSidePanels01.jpg
    http://dl.dropbox.com/u/7460156/MameSidePanels02.jpg

    (edited by hawken - I won't delete this but links for pictures please)

    As far as plans go, you can find a whole slew of plans online for arcade cabinets. http://wiki.arcadecontrols.com/wiki/Cabinet_Plans Just take any one to base yours off or re-create it as is. :)
    The hardest choice to make is what kind of monitor you're going to use imho. Depending on the cabinet specs, you'll need at least a 21" and preferably a 25". But the latter only comes in the arcade monitor variant, and those don't come cheap.
    We opted for a television with a VGA to SCART (EU standard) cable I still need to make at some point to translate the VGA to RGB signal combined with using some software driver hacks to get the refresh rates good.

    If you ever get started on one, it ain't cheap. Unless you already have the proper powertools available already (table and circular saw, sander, jigsaw, heavy duty drill, router, etc...), which we did not. :D

    If you want some more infos, shoot me a pm. ;)
    [/THREAD HIJACK]

    Rapante: Are you telling me you did not dither those gradient yourself? Shame on you! :D

    Fuck, I'm gonna try to get some action of this contest as well! Do FX and all that stuff count for the tri budget?
  • Rapante
    Offline / Send Message
    Rapante polygon
    Maph, I'll do it next time, I promise :poly142:

    ok here she is, little blue riding hood :D

    powerbike_rider.png

    tris: 1023 combined

    will unwrap and texture her later because I literally have to catch a train in an hour or so, my bro's wedding is tomorrow :)
  • Mr_Drayton
    Offline / Send Message
    Mr_Drayton polycounter lvl 14
    Rapante wrote: »
    Rad rad rad!

    Tell the truth. t's a future model of a Kawasaki Ninja. And they'll sell Ninjas bundled with motorbikes!
  • Harry
  • Tigerfeet
    Offline / Send Message
    Tigerfeet polycounter lvl 12
    Rapante wrote: »
    ok here she is, little blue riding hood :D
    Oh she's super cute I love it! Great line on those hips too. Definitely saving this for edge loop inspiration! :D
  • VPrime
    Offline / Send Message
    VPrime polycounter lvl 9
    Maph, that is awesome. I built my own arcade fight stick for street fighter over the summer. My plan is to build an arcade cabinet next year :)
  • Nick Carver
    Offline / Send Message
    Nick Carver polycounter lvl 10
    I fucking love this thread. Always so much inspirational stuff.
  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    9skulls wrote: »
    It's a great idea, but I am afraid that as soon as you make this "official" ppl will fleet the same second.
    Can't say I agree with you. Challenges usually have a high turn out.
    9skulls wrote: »
    But if you are going to set down some rules, I think 1000-1100 tris for the combined biker + motorbike is about the correct limit. That and texture size of MAX 256² for each model.

    Hmm, don't really agree with this. To be fair Rider should be optional, and separate budget. It's a much more modular approach surely?

    1024 is a nice round number we usually use.
  • Fomori
    Offline / Send Message
    Fomori polycounter lvl 12
    hawken wrote: »


    Hmm, don't really agree with this. To be fair Rider should be optional, and separate budget. It's a much more modular approach surely?

    1024 is a nice round number we usually use.

    Let's have the rules clearly outlined then and get the challenge started. What's it gonna be?

    I've already started in mind to keep bike+rider below 1100 tris.
    but would like to know asap if I can go higher.
  • Baddcog
    Offline / Send Message
    Baddcog polycounter lvl 9
    I like the bike/rider combo. And at 1024 it's a good challenge. We make it 1024 bike alone and not quite the challenge.
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    hawken wrote: »
    Hmm, don't really agree with this. To be fair Rider should be optional, and separate budget. It's a much more modular approach surely?
    Well, in my original post I stated that I wanted to see bikes with bikers. Since some people wanted to go for it and have so far done both bike and biker, I don't really see any reason why one should go and change it.

    But then again, I never started it out as a competition or anything that formal, so yeah, whatevs. Start a bike competition if you like :)
  • Rapante
    Offline / Send Message
    Rapante polygon
    Personally I liked the idea bike+rider a lot more than just the bike as characters are way out of my comfort zone. I'd say 1024-1100 tris for both around 768 then for the bike alone :) but heck that would just be my preference :)
  • Tigerfeet
    Offline / Send Message
    Tigerfeet polycounter lvl 12
    I also really like the bike+rider, and for the same reason as Rapante except I'm much less comfortable modeling and texturing mechanical objects. I think it's a great challenge and I'm having a whole lot of fun with it :D My own model is less than 1000 tis though so I might go back and add some things. Or maybe I'll just make a gun for her with the rest of my budget :D

    Edit: I do think we should keep the texture size at 128x each because there's been so many of us that have already made textures that size :)
  • Delko
    Offline / Send Message
    Delko polycounter lvl 16
    Since I learned how to do proper turn tables I figured I'd post one of for the heck of it.
    policecar3turntable.gif
    You can check out the rest here http://www.indiedb.com/games/turbo-run/images/turntable7#imagebox
    Rapante I really dig that texture style, the addition of the gradients really make the texture look crisp and clean.
  • Racer445
    Offline / Send Message
    Racer445 polycounter lvl 12
    Maph wrote: »
    The hardest choice to make is what kind of monitor you're going to use imho. Depending on the cabinet specs, you'll need at least a 21" and preferably a 25". But the latter only comes in the arcade monitor variant, and those don't come cheap.
    We opted for a television with a VGA to SCART (EU standard) cable I still need to make at some point to translate the VGA to RGB signal combined with using some software driver hacks to get the refresh rates good.

    curse you lucky people in the EU getting RGB on TVs! here we need to hunt for industrial monitors with BNC connectors for RGBHV, and most of the cheaper ones (sony pvm) are only 15khz, so the good tri-sync displays like the nec xm29 sell for a premium. thankfully i found an older tri-sync mitsubishi for $40 in decent condition, though i'm pretty sure the yoke is out of alignment causing some wacked geo and bad edge convergence.

    i'm a crazy hardware purist nutjob but you should just be able to wire up a simple cable and use a tool like soft-15khz, right?

    anyway, enough derailing.
  • hawken
    Offline / Send Message
    hawken polycounter lvl 19
    In the past Challenges have been criticized for being needlessly low-spec, but as everyone seems up for a challenge, I'll go with that original spec of 1100 / 256x256 for the lot.

    Challenge will officially start when the Tron challenge voting ends (oct 31st)
  • [SF]Three9
    Sword1.jpg
    Sword2.jpg

    ugggggh I love Tyson Murphy's tutorial...Concept on left, mine on right
    Model and texture have taken about 3 hours combined so far, will hopefully have it done tomorrow :D

    338 tris, self-lit
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    Delko YAY turntables! ^^ Looking cool as usual!

    [SF]Three9
    Your texture painting skillz are crazy! :D
  • Gorman
    @All motorcycle modellers; doing awesome jobs everyone!

    Rapante Amazing bike there! I have probably been playing too much Deus Ex, but it looks like a way prettier version of the one in Pritchett's office :)
    Can't wait to see the finished rider!

    [SF]Three9 Why is this edge loop there?
    whythisisthere.png
    I don't think it serves a purpose :P

    8skulls Nice arcade cabinet! I love your work :D
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    [quote=Gorman;14513008skulls[/quote]
    wthplz.png



    EDIT
    Well I might just aswell do something useful with this post.

    I saw another comp at lowpolyworkshop and thought it might be a nice reason for me to do some more low poly modelling.

    So the comp was about making a building under 3000 tris or so, and I thought I'd make a club house for my biker. Basically it is like an old pirate ship or something which was later transformed into a house. Top part of the building – "the old deck" of the ship – acts as relaxing chillout place. The roof will be growing grass 'n' trees 'n' stuff, so it's like own personal forest on your roof.

    But yeah:

    ch_turntable_1b.gif

    Currently my building is sitting at 1066 tris with 128² texture, which obviously is WIP:
    clubhouse_tx.png

    There's some usable space left for additional stuff I need to be adding later on.

    Any ideas of what I should add to the top part of the ship which currently looks very empty (the part where the steering wheel should be)?
  • Tennis
    Offline / Send Message
    Tennis polycounter lvl 16
    new model im working on.
    hoping to keep him under 500 when finished.
    robot.png
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    @Tennis Cool robot! Are you going to animate it? I'm loving the texture already :P
  • Gorman
    9skulls Three times I tried to type your name and every time it came out 8skulls :I
    I think I have a serious disorder...

    Seriously though, much love.
  • Maph
    Offline / Send Message
    Maph polycounter lvl 8
    Tennis: Seriously cool so far man! The texture on his head is pretty freaking awesome already!
  • 9skulls
    Offline / Send Message
    9skulls polycounter lvl 13
    Some progress with the texture. I'll call it for the day Zzz...

    > see it here <
  • paradise.engineering
    Offline / Send Message
    paradise.engineering polycounter lvl 11
    omg 9sk!! that's the most beautiful ship I've ever seen, and I'm a navy officer.
  • green
    Tennis and 9skulls Awesome stuff!

    And to make sure this post isn't a total waste, I'll just post something I'm working on right now.

    Lowpoly_Pumpkin.png
    Texture_Pumpkin.png
Sign In or Register to comment.