Home 3D Art Showcase & Critiques

Organic Texture Practice - It Rocks!

1
polycounter lvl 15
Offline / Send Message
jacob07777 polycounter lvl 15

Update 1-27-2015
In other news (shameless plug), I have recently added most of these textures to my gumroad if anyone is interested!

https://gumroad.com/purepolygons

norris-texture_packjpg

There's also the Building Breakdown and some other free goodies on there. Enjoy!
- Jacob



Original Post


imagejpg

Hey guys, so it's been a long time since I posted anything on here, but it's also been a long time since I've been able to do some of my own personal work. So I've been messing around with Zbrush trying to push my textures as far as I can within Zbrush before adding any after touches with photoshop. Here are a couple of the textures I have started with so far and I will be posting more as time goes on. It's just rendered in Marmoset with some displacement on some flat planes. Hope you all like it!

Here are some rocks/cliffs I made
screenshot001jpg
screenshot002jpg
screenshot003jpg

Here is like a muddy/wet/grassy/rocky/watery/many things ground I made
screenshot000jpg
screenshot004jpg

I'm working on a few others right now and will be adding them in a couple weeks when I get some more free time. Enjoy!


---=== UPDATE 8-2-2014 ===---


Hey guys,

So I have been working on some stones for the ground. Like a stone pathway built by people. I didn't break this one up into multiple sub-tools for the stones, but tried a new technique of simply creating a height alpha in photoshop based off of an image that I tiled. I then used the height alpha as a base to sculpt the texture in the hopes that I could achieve a pretty strong result still, but a much faster workflow than sculpting each individual stone as a subtool, or using repeated subtools. Hope you guys like it

NorrisJacob_stones01jpg
NorrisJacob_stones02jpg


--- === UPDATE 8-9-2014 === ---


I'm really happy to hear everyone likes the breakdowns! Thanks for the comments everyone. It's comments like these that keep pushing me to try to make some awesome artwork.

So I have been working on a new texture guys. I wanted to try my hand at making some tree bark, trees have always been pretty tough for me so this was definitely a texture type I wanted to hit during this practice of mine. So this is a bark NOT like an Oak Tree with very deep bark and lots of crusting falling of chunks of the tree. I was going for more of a Juniper Red Tree or a London Plane Tree. Comments and Critiques are always welcome and I hope you guys enjoy the work!
NorrisJacob_treebark01jpg
NorrisJacob_treebark02jpg


--- === UPDATE 9-9-2014 === ---


In the meantime I have been at it again this time trying to make some branches with leaves on them. I feel pretty good about it, but I can't quite put my finger on it something seems off about them. Maybe I'm just being harsh on myself as most artists are.

NorrisJacob_tree_leaves1jpg
NorrisJacob_tree_leaves2jpg

Replies

  • Sculptaur
    HOLY FUCKING GRASS! HOW YOU DO THAT? :poly115:

    Seriously though, great work man! Care to give a break down on how you achieved that result with the grass and the mud and the water?
  • luthyn
    Offline / Send Message
    luthyn polycounter lvl 8
    This looks amazing, would love to see your process! Keep it up!
  • herc
    awesome work, really love the bottom render. The water puddles look sweet.
  • DireWolf
  • Mellon3D
    Offline / Send Message
    Mellon3D polycounter lvl 13
    Tessellation!! It`s Awesome!!
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    @Sculptaur - Thanks a lot man! Really glad you like the work. I took some more images to break down the process a bit more for you guys. It's not a full on tutorial, but it's a much more in depth look at what's going on.

    So I started off by sculpting mud in Zbrush just as you normally would. Getting some cool shapes and some height variation into the texture. I then sculpted a few rock subtools which I placed around the mud in different areas.

    As for the grass, I created this little guy in Maya and brought it into Zbrush to start working with.
    tut_01jpg

    From there I simply duplicated the subtool of the grass multiple times, rotating and scaling it all over the mud, moving it in front and behind the mud to get different height variation. After I had a pretty good coverage of the grass on top of the mud, I combined all of the grass subtools and did some quick pushing and pulling with different brushes. Used the spiral brush to spin some of the blades of grass and the move brush to pull and push different areas until it looked the way I wanted it. I then rendered it as a different color within Zbrush so that I could get a quick select for it in photoshop to texture it and paint it here is what the zbrush looked like.
    tut_02jpg


    Moving along now, I'll talk a little bit about the puddles. After I finished the sculpt I exported the height map and brought it into photoshop. (This could have been done much easier in zbrush but the puddles were a secondary thought that I ended up adding in photoshop later) So here is a quick image of how I created the puddles within photoshop.
    tut_03jpg

    Lastly here is a nice gif for you guys showing off how much the tesselation on the grass helps to give it that effect. The effect can also be achieved with a Parallax, but I chose to go with Tesselation for this one as it tends to give me better shadows and AO in rendering. A with and without tesselation gif image.
    tut_04gif
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    Thanks everyone for the comments! I'll keep working away for now
  • samo8076
    Amazing. Truly inspiring.
  • rusty_hawk
    Offline / Send Message
    rusty_hawk polycounter lvl 13
  • Sculptaur
    Killer, Thanks heaps for the breakdown dude!
  • Gazu
    Offline / Send Message
    Gazu polycounter lvl 12
  • tulkas09
    Offline / Send Message
    tulkas09 polycounter lvl 7
    Looks great, thanks for the breakdown! :D
  • beefaroni
    Offline / Send Message
    beefaroni sublime tool
    Wow. Great method for the ground + thanks for sharing.
  • DireWolf
    Thank you for the break down.
  • almighty_gir
    Offline / Send Message
    almighty_gir ngon master
    on the flat puddles thing, it may be quicker/easier, to have a plane slightly below your sculpting plane that's never touched, this would represent your water layer. you sculpt your ground plane down below the water layer, and export both together as your high poly. that way when it bakes down your water layer will be flat, always.
  • Grindigo
    Offline / Send Message
    Grindigo polycounter lvl 6
    I like it a lot but I really don't know if it's worth tessellating the grass, maybe it would be better to keep areas with grass blades flat but instead use grass sprites for the particular areas, otherwise I really like it, I tried doing grass myself in zbrush once but I failed as results became messy so I'm glad to see someone else succeed on this.
  • AlecMoody
    Offline / Send Message
    AlecMoody ngon master
    That is looking great but how do plan to make them look good on an actual environment over larger areas?
  • Mrfido
    Offline / Send Message
    Mrfido polycounter lvl 12
    This still blows my mind!!
  • Odeca
    Offline / Send Message
    Odeca polycounter lvl 3
    Oh my god. I'm speechless.
  • almighty_gir
    Offline / Send Message
    almighty_gir ngon master
    oh i just noticed something in your "how to" image here: http://www.purepolygons.com/temp_images/polycount_7-27-2014/tut_03.jpg

    absolutely DO NOT make water very bright in your reflectivity map. water has an extremely LOW reflective point, because most light passes through it! water is around 0.02 linear reflectivity.
  • Digitalair
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    Thanks a lot everyone, I really had no idea people would like it so much :) I was thinking I would get torn apart since I haven't posted on here in so long.

    @almighty_gir - Yes you're right, normally I would do it that way in Zbrush by adding a plane underneath the mud to get the effect for the puddles. In this case I didn't for two reasons. One was that as I mentioned the puddles were an after thought and so I pretty far along in the texturing process already within photoshop when I wanted to add them. So it was quicker in my case to do it this way. And secondly, I realized after doing it this way that I was able to get some great diffuse information from my sculpt "under the water" by doing it this way. So it provided a better result in the end.

    As for the tut picture, thanks a lot for the catch! We have our reflectivity maps inverted in the Fox Engine so I'm used to making them bright in both maps. But you're totally right, it should be very dark in most every other engine. I have updated the image to "reflect" your comments ;)

    @Grindigo - You're totally right and I would normally do it the way you mentioned also. For the purposes of this practice for myself though I was seeing simply what I could accomplish with a flat texture sheet and no additional shrubbing or propping on top of the ground surface. Thanks for the comment!

    @AlecMoody - That's a good question. Unfortunately I don't have an answer right now lol. I was mostly doing this to practice zbrush a bit more, but who knows maybe I will turn all of these into some kind of small scene when I'm done with them :)

    Thanks again for all of the comments, let me know if anyone else has any other questions. Otherwise I hope to get some more textures finished up here soon
  • almighty_gir
    Offline / Send Message
    almighty_gir ngon master
    Fox Engine?!

    HNGHHHHH.....

    0f9xfy.jpg
  • ajester
    Offline / Send Message
    ajester polycounter lvl 8
    Damn! Gonna try this out!
  • luthyn
    Offline / Send Message
    luthyn polycounter lvl 8
    Thanks for the breakdown!!
  • JValencia
    Offline / Send Message
    JValencia polycounter lvl 10
    Good use of height variation in all those textures :)
  • Deathstick
    Offline / Send Message
    Deathstick polycounter lvl 7
    That is one sexy ground plane
  • HiernauxNicolas
    Offline / Send Message
    HiernauxNicolas polycounter lvl 10
    Thank you for your explanations jacob 07777 !
    It was very useful for me for creating my own terrain texture on my diorama :)
  • sltrOlsson
    Offline / Send Message
    sltrOlsson polycounter lvl 14
    Super sex! You textured the rock wall in ZB? Gives us some goodies from that one too! Thanks for the breakdown!
  • MeshModeler
    Offline / Send Message
    MeshModeler polycounter lvl 11
  • ae.
    Offline / Send Message
    ae. polycounter lvl 12
    this looks great especially the ground texture :)
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    Glad everyone likes it ^__^ It's great to hear that the breakdown is helping people!

    @sltrOlsson - I will see if I can put something together in the next couple of days. During the week I don't have much time right now, since we're crunching at work. So I apologize if it takes me a little while to get the breakdown up.

    @MeshModeler - Suk deez nuts, get back to work lol

    Thanks again everyone
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    @sltrOlsson - To be honest, I don't even know how those rocks got made man. There is only one explanation.
    aliens-memejpegw390
    Haha, so I put together a little tut for the rock today. I won't be getting too much into the specifics of the sculpting process, as that is kind of different for everyone, but I will talk about the brushes and techniques I use.

    So something that i didn't mention about the grass/mud texture that I should have. Is I use a tiling texture plane technique for my textures that I learned from Brad over at Naughty Dog. There is a great video on it here.
    [ame="

    This technique allows me to create a tileable texture from within Zbrush and helps me save a lot of time fixing seams in Photoshop later.

    - So using this tiling/wrapping brush technique I start off with a flat plane for the rocks and begin sculpting large shapes with the clay brush. I am still in a decently low poly mesh right now around 20k. This allows me to get the large forms in and the basic details for the rocks that I want with quick iterations pushing and pulling. While I am doing this I am using the Trim Dynamic brush to polish off areas and get some nice sharp edges for the rocks.

    - After I have a pretty good base mesh to work from on the rocks I think start adding a lot more poly's and get up into the millions. Here I am using a variety of brushes to get details in. I personally like the MalletFast2 brush which I use to chip a lot of edges off. While doing this I am still using the trim dynamic brush to polish areas, I am also using the noise brush in a spray mode to get some nice rocky crevices and details across the surface. I'm also using the slash 3 brush for some of the cracks in combination with the MalletFast brush. At this point I am about here in detail.
    tut2_00jpg

    Now I want to start adding the moss and the light patches across the rock. So I first Grabdoc my rocks so that I can take this into photoshop and start creating a mask for where I want moss to be placed. I have an image of my rock sculpt in photoshop now and I am making the moss a black color mask and the white areas a white colored mask. I will be bringing this back into zbrush to do something special with it. Here is an image of the mask I created for my moss and patches across the rock. I will be using it to get some nice bevels on my rocks in zbrush. (This can also be done in post using crazybump or ndo, but i wanted to do as much as I could in zbrush)

    PS: Don't ask me why, but whenever I import my mask into Zbrush, I have to flip the image vertically(not rotate, FLIP!) So I bring the alpha in upside down and it shows up correctly on the mesh, maybe someone can explain to me why this happens? But it is a necessary step for myself.

    tut2_01jpg

    Now that I am back in Zbrush I am going to import my alpha/mask that i just created in photoshop. I then want to mask my zbrush tool using the alpha that i created in photoshop. So I go here.
    tut2_01-1jpg

    After my ztool is now masked using the alpha that i made in photoshop, I want to bevel that detail into the mesh. Whatever is grey in my alpha will not move at all. Whatever is black will be pushed back into the mesh and whatever is white will be pushed out towards the camera just like a height map. So using my mask I go to the deformation tab in zbrush and offset my mesh in the Z-Axes. Because for me, the Z-Axis is facing the camera so it will push and pull things properly.
    tut2_01-2jpg

    I then offset the mesh until I get the desired amount of bevel from the alpha that is what I want. Since my ztool is still masked I can now use this mask to sculpt in the moss detail without affecting the rock areas. So I simply went over all of the moss with the noise brush. Nothing really special here. This is the resulting zbrush sculpt after the deformation mask was applied and the noise was sculpted on top of the moss.
    tut2_02jpg

    From there it's just normal photoshop texturing and I already have a nice mask for photoshop to texture in my moss detail I hope this helps and it's not a jibber jabber of text/information that is out of context or doesn't make sense.
  • gloriousczar
    Offline / Send Message
    gloriousczar polycounter lvl 6
    These breakdowns are super helpful, thank you! That mud is amazing too, what brushes did you use for the mud?
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    @gloriousczar - No Problem! For the mud it was a similar process as the rocks. Using the clay a lot, then i would flatten areas with the flatten brush. Sometimes I would use the clay brush on "spray" mode and then smooth parts out with flatten or even the smooth brush to give it a softer mud feel. It's just a lot of back and forth until you get what you want. But keep at it and eventually it will look like you want it to!
  • Quack!
    Offline / Send Message
    Quack! polycounter lvl 17
    Fantastic high level stuff here! I am very impressed.

    Thanks for the breakdowns on the process, it is always great to see how people achieve what they do.
  • atomander
    Offline / Send Message
    atomander polycounter lvl 7
    Thank you! This is very helpful!
  • jamiemurphy
    Offline / Send Message
    jamiemurphy polycounter lvl 8
    very inspiring, thanks a lot!
  • bobmartien
    Offline / Send Message
    bobmartien polycounter lvl 11
    Really awesome stuff here.
    Thank you for the breakdown
  • Rhnn
    This is s sexy I'm having multiple orgasms.
  • jonas-144
    Offline / Send Message
    jonas-144 polycounter lvl 6
    awesome work man!
  • felipealves
    Offline / Send Message
    felipealves polycounter lvl 11
    Very nice ground man!

    And thank you for the breakdowns.
  • LuCh!
    Offline / Send Message
    LuCh! polycounter lvl 5
    looks amazing, thanks for the breakdown! ;)
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    Thanks a lot guys :) I'm really excited to have gotten my first Poly Recap! It's great that everyone is digging the work I'm doing and that the breakdown is a help to everybody. I'm hoping to get another texture done this weekend. We'll see how it goes
  • jacob07777
    Offline / Send Message
    jacob07777 polycounter lvl 15
    Hey guys,

    So I have been working on some stones for the ground. Like a stone pathway built by people. I didn't break this one up into multiple sub-tools for the stones, but tried a new technique of simply creating a height alpha in photoshop based off of an image that I tiled. I then used the height alpha as a base to sculpt the texture in the hopes that I could achieve a pretty strong result still, but a much faster workflow than sculpting each individual stone as a subtool, or using repeated subtools. Hope you guys like it

    NorrisJacob_stones01jpg
    NorrisJacob_stones02jpg
  • AbKI
    Offline / Send Message
    AbKI polycounter lvl 6
    Looks great! Looking forward to trying out some of your techniques, thanks for sharing!
  • deohboeh
    Offline / Send Message
    deohboeh polycounter lvl 5
    This looks great! Thanks for the tuts!
  • xChris
    Offline / Send Message
    xChris polycounter lvl 10
    I WANT TO ROLL IN THAT MUD

    Jacob, would you be open into sharing a little back story into how you got into Kojima productions and what your days are like, MGS is my favorite series ever, really jealous!:thumbup:
  • Kobalt Kiwii
    Offline / Send Message
    Kobalt Kiwii polycounter lvl 6
    This is amazing! Hoping to try and understand/emulate this mud for a project I'm working on :)
  • Zieg_Reborn
    Offline / Send Message
    Zieg_Reborn triangle
    Incredible looking texture work, man. Keep up the awesomeness.
1
Sign In or Register to comment.