[DOTA2] - Doom Bringer - BoBo

BoBo_the_seal · Oct 2012

Didn't get enough demon work on Darksiders ... must have more!

Also thinking about OGRE MAGI. Love the two headed fat guy

- BoBo

Edit:
Blank for Helm:

Blank for Sword:

Soldeus · Oct 2012

This goes to FAVs right now, can't wait to see what you're going to do!. (An Ogre Magi set would be AWESOME imho)

Arkadius · Oct 2012

This is exciting

beta_channel · Oct 2012

If we report Bobo for spam or child porn or something, then we can probably get him removed from the comp...I say we band together and make this happen.

Sigh...happy to see you entering Bobo...sigh.

Anuxinamoon · Oct 2012

Sweet! Hoping you would join BoBo!

Lucky OGRE MAGI gets a new do. Canny wait!

JacqueChoi · Oct 2012

K-PAX · Oct 2012

hah,waiting for your show~

BoBo_the_seal · Oct 2012

Blank done for the helm:

- BoBo

bounchfx · Oct 2012

damn dude, cool feeling silhouette, really clean Did you sculpt it then remesh, or hand make? I see the black wires but I also see that it's subdivided, so I'm confused on what to believe!

either way this looks sweet so far

ZacD · Oct 2012

lovely modeling as usual, can't wait to see on the character.

Spudnik · Oct 2012

...I'll be in my bunk.

EVIL · Oct 2012

Awesome blank, cant wait to see what you do with it in zbrush!

Callesw · Oct 2012

wow, this will be interesting!:)

Pierate · Oct 2012

So I guess this means the rest of us Doom Bringer pickers are now screwed.

Seriously though, I like it a lot, looking forward to seeing where you take it.

Xeramon · Oct 2012

It looks realy awesome so far, cant wair for more

Torch · Oct 2012

Can't wait to see more, as soon as I saw the name 'BoBo' I thought this was gonna be sick

Hang10 · Oct 2012

This might be a redundant question but how did you get such smooth lines? Extrude along spline?

and I like the lighting/shader setup you have.

JacqueChoi · Oct 2012

This looks EPIC!

One thing that I'm a little worried about are the back horns. If he turns his head, it might clip through the wings.

praetus · Oct 2012

welp, pack it up boys, we're all done here. On a serious note, for your workflow do you concept out thumbnails or do you plan on tooling around in ZBrush for some rapid prototyping? I'm really looking forward to seeing what comes out of this thread either way.

D4V1DC · Oct 2012

Nice, nice but like Jacque says maybe want to check that out, well unless your just making every piece which then you can ignore that issue.

Loving it

Snipergen · Oct 2012

Yeah this is fantastic bobo! Awesome work man.

BoBo_the_seal · Oct 2012

Thanks everyone!

bounchfx - Just poly modeling. This is the blank that I will take into Zbrush. The mesh has nurms subdivision turned on with a smoothing groups bias.

Hang10 - the horns were originally extruded along a spline but most of it was strip modeled first then I went back and filled in the gaps.

JacqueChoi - I took that into consideration when making the helm. That's why the horns dip inwards and then back out. They bow creating a space for the wings to function in. They only clip in extreme angles and I can live with a little clipping.

Praetus - For this helm I had a pretty clear idea of what I wanted to do (horns going into two directions and a mixture of a knights visor and a ram skull) so I just jumped into the model.

I will have more posted this weekend.

- BoBo

zicoV · Oct 2012

Stop making the rest of us look bad.

No seriously cant wait to see more :thumbup:

Soldeus · Oct 2012

Really nice design, it seems everything you do looks so badass . I would never know about the NURM's + Smoothing group technique if it wasn't for that stream you made of the Scythe, it saved me a lot of time in my workflow, thx! ^^

JacqueChoi · Oct 2012

BoBo_the_seal wrote: »

Thanks everyone!
I took that into consideration when making the helm. That's why the horns dip inwards and then back out.

Like a baoss!!!

luckycat · Oct 2012

lookin good! I like the horn design & helm good synergy with the Hero imo.

agentfx · Oct 2012

lookin insane. Great design.

HntrLuc · Oct 2012

Ugh I was totally thinking about Doom Bringer too! Looks great BoBo, looking forward to more!

Isaiah Sherman · Oct 2012

No, Bobo! Go away! I wanted to do him!

er... I mean... lookin' good so far

damio · Oct 2012

Woah that's a clean and badass model!

Soldeus wrote: »

Really nice design, it seems everything you do looks so badass . I would never know about the NURM's + Smoothing group technique if it wasn't for that stream you made of the Scythe, it saved me a lot of time in my workflow, thx! ^^

I watched that stream too, but i didn't get how he did it. Would help me alot if anyone can tell me how to do this. I know maya pretty well, but this is completly new to me.

echineon · Oct 2012

could you tell us how you extract doom bringer model to 3d mesh please? I'm having trouble with that to start modelling cloths/armor for him. I use zbrush. Great work.

Hazardous · Oct 2012

Awesome man! This will be great!!

When I saw this guy the other day I was like... dayum!! *must resist urge to model something thats not a chick!* his profile is so damn cool.

Lennyagony · Oct 2012

Awesome, love thos clean shapes and lines. And that he looks like even more of a badass already!

Small crit, the rear horns have a quite a bit of thickness to them in the vertical space but not so much the horizontal.

Soldeus · Oct 2012

damio wrote: »

Woah that's a clean and badass model!

I watched that stream too, but i didn't get how he did it. Would help me alot if anyone can tell me how to do this. I know maya pretty well, but this is completly new to me.

Basically you have to:
1. Apply smoothing groups
2. In Editable Poly activate 'Use NURMS Subdivision' and by 'Smoothing Groups' http://puu.sh/1eopu
3. In the menu that will appear, put some iterations on the smoothing so it becomes a quite dense mesh. http://puu.sh/1eorn
4. Export that dense mesh to Zbrush as usual.
5. In Zbrush,go to the 'Geometry' tab and press the button 'Reconstruc Subdiv' (It may appear in a different place depending on your zbrush version) http://puu.sh/1eosx .

And thats it, you have all the subdivs back ^^ b4 knowing this I usally made a highpoly version the 'old way'. Turbosmooth on and support loops for the hard edges everywhere till it looked fine, and it was so so time consuming...

Hope that helped ^^ (Soz for the offtopic btw)

Sukotto · Oct 2012

Soldeus wrote: »

Basically you have to:
1. Apply smoothing groups
2. In Editable Poly activate 'Use NURMS Subdivision' and by 'Smoothing Groups' http://puu.sh/1eopu
3. In the menu that will appear, put some iterations on the smoothing so it becomes a quite dense mesh. http://puu.sh/1eorn
4. Export that dense mesh to Zbrush as usual.
5. In Zbrush,go to the 'Geometry' tab and press the button 'Reconstruc Subdiv' (It may appear in a different place depending on your zbrush version) http://puu.sh/1eosx .

And thats it, you have all the subdivs back ^^ b4 knowing this I usally made a highpoly version the 'old way'. Turbosmooth on and support loops for the hard edges everywhere till it looked fine, and it was so so time consuming...

Hope that helped ^^ (Soz for the offtopic btw)

How would one go about doing that in Maya?

TMiuccio · Oct 2012

Soldeus wrote: »

Basically you have to:
1. Apply smoothing groups
2. In Editable Poly activate 'Use NURMS Subdivision' and by 'Smoothing Groups' http://puu.sh/1eopu
3. In the menu that will appear, put some iterations on the smoothing so it becomes a quite dense mesh. http://puu.sh/1eorn
4. Export that dense mesh to Zbrush as usual.
5. In Zbrush,go to the 'Geometry' tab and press the button 'Reconstruc Subdiv' (It may appear in a different place depending on your zbrush version) http://puu.sh/1eosx .

And thats it, you have all the subdivs back ^^ b4 knowing this I usally made a highpoly version the 'old way'. Turbosmooth on and support loops for the hard edges everywhere till it looked fine, and it was so so time consuming...

Hope that helped ^^ (Soz for the offtopic btw)

Is there a link I can follow to this stream you guys are talking about? I havent seen this workflow before and it sounds interesting

artquest · Oct 2012

Sukotto wrote: »

How would one go about doing that in Maya?

The closest I've come to replicating this workflow is to split the verts where u want to keep your hard edges. Otherwise check out the mark hard edge tool in maya.

Soldeus · Oct 2012

I have no clue of maya, sorry.

@TMiuccio http://www.livestream.com/vigilnights/video?clipId=pla_69d386b0-0c57-444a-a1e5-4c820a55e9d2&utm_source=lslibrary&utm_medium=ui-thumb

TMiuccio · Oct 2012

Soldeus wrote: »

I have no clue of maya, sorry.

@TMiuccio http://www.livestream.com/vigilnights/video?clipId=pla_69d386b0-0c57-444a-a1e5-4c820a55e9d2&utm_source=lslibrary&utm_medium=ui-thumb

Thanks!

damio · Oct 2012

Thanks Soldeus!

Sorry for off topic.

BoBo_the_seal · Oct 2012

Thanks everyone! Glad you like it. And big thanks to Soldeus for answering the questions about the nurms technique.

I don't have a lot of spare time so I'm going to do 3 pieces to completion first (the minimum for the contest) then I'll work in the other pieces as I have time. I've decided to do the helm, sword, and shoulerpads. If I have time I'll move on to the arms and waist. If I still have time after that I'll replace the wings and tail.

Here is the blank for the sword. I'm a big fan of cleaver style swords. It's all about hacking and not stabbing. Just seems more brutal.

- BoBo

motenai · Oct 2012

Badass sword!

EVIL · Oct 2012

Thats an awesome looking sword, and cleavers are awesome!

edit one small crit, the spot where the blade and the grip guard meets you have this extra spike that is formed from the blade. I feel that is just a bit much and messes up the flow of the model. Here is a small paint over suggestion that IMO looks a bit better

BoBo_the_seal · Oct 2012

Evil: Good call! It sells the cleaver look more too. I'll make that change before going into sculpt.

- BoBo

TMiuccio · Oct 2012

I'd say just sharpen up that spike that Evil painted out. I think that much curve in the small point just looks flimsy. Looking good +1

Soldeus · Oct 2012

I think curving the handle spike-thingy would improve it a lot, right now that piece looks flat compared to the rest of the weapon(which looks so stylized with all that curved detail)imho, the rest is awesome. +1

Not sure if it will give some clipping problems with the doombringer hand if you curve it anyway.

jnumber9 · Oct 2012

uhhh... I always envy when I see such equal mesh. every polygon is like the others by the size. is this some dark wizardry or something? great job!

Tvidotto · Oct 2012

your mesh is insane! =]

miura · Oct 2012

Love the use of polys, so clean. Looking forward to seeing the textures!!

LuCh! · Oct 2012

ah damn, this is looking way to awesome!
really like the helmet!

Tvidotto · Oct 2012

plz update that Bobo! =]

[DOTA2] - Doom Bringer - BoBo

Replies