FENDER 3d model
polycounter lvl 4
Hi there!
i've made Fender American Standard Stratocaster guitar in Blender... I wanna hear bad and good things of it (maybe something is good...
)
It's one of my first models in Blender so i think it sucks...
I don't know what is this black fields on fretboard
i've made Fender American Standard Stratocaster guitar in Blender... I wanna hear bad and good things of it (maybe something is good...
)It's one of my first models in Blender so i think it sucks...
I don't know what is this black fields on fretboard
Replies
-The edge of the pick guard should have a bevel instead of being straight
-There should be holes in the pick guard where the pickups are.
-You put thickness variation in the pick guard near the tone knob that should not be there.
-Screws hold the pick guard in place, not rivets
-Screws near the pick pickups so their height can be adjusted, not rivets
-The bridge plate at the back should be thicker
-Missing the tremolo hole
-Bridge plate flat on body (altho i prefer mine almost flat, you need about 1/8" off the body)
-Screws hold the saddles (so they can be adjusteed), yours seem like rivets
-Shape of the saddles look nothing like my strat's (maybe that's another type)
-Volume/tone Knobs should be flat on top, not extruded in
-I have no idea what's up with the jack connector, the jack i usually "cut" into the body, not protruding.
-Shape of the tuners is off, and missing screws on top
-The pins that hold the guitar strap should also have screws
-Missing the metal piece that holds the b and e strings on the headstock (some models have 2)
-The strings should have different gauge thickness.
Bonus: this virtual guitar would sound very out of tune, the saddles are not adjusted properly...at least not for standard tuning
I've made a new fretboard. Here is some images:
I'm going to do all again. If you have some advices, it will be great