Home 3D Art Showcase & Critiques

the Mandatory Folio Review | Pyr3D - Characters

polycounter lvl 12
Offline / Send Message
PyrZern polycounter lvl 12
I was planning to job-apply more actively after finishing up my latest piece. I took advice from last time, and cut down the number of pieces in the folio to 3-4 pieces, but I think I gotta present them better to make em pop and shine.

http://www.pyr3d.com/

The Facebook link also goes to my art page, not my personal page. (it's very new, though :P almost empty atm.)

If I want to do game characters as well as 3d print stuff, then should I have sculpt pieces in there as well ?

I notice Carbonmade isn't so user-friendly that ppl can save images or pin them online. Is that a big deal breaker ?

Replies

  • BARDLER
    Offline / Send Message
    BARDLER polycounter lvl 12
    Yea being able to right-click save images is really important.

    As for the work, I think the biggest thing that sticks out to me is the texturing and material definition. The wizard for example has 2k and 4k maps, but I cannot see why you would need that resolution for what you are showing. Also the textures themselves do not seem to be using the PBR setup in marmoset to the fullest advantage, you are getting some really muddy shadows, and flat looking metal. Can you post the maps for him?
  • Fwap
    Offline / Send Message
    Fwap polycounter lvl 13
    Having you photo's pinable is great exposure, if your work gets pinned. Not necessarily a deal breaker on that front.
    But alas, something to keep in mind.
  • PyrZern
    Offline / Send Message
    PyrZern polycounter lvl 12
    Sure man, I will post up the texture maps of the Wizard when I get back in a few hrs.

    Anything else I can get comments on ?
  • DWalker
    Make certain each project starts with a beauty shot; the wizard is the only textured project that doesn't, but that's still one too many. ;)

    Untextured projects always feel unfinished. Resist the temptation to post works-in-progress and be aggressive about culling the weaker projects over time.

    Overall, your textures could use the most work. They're missing many of the finer details that have become common over the last several years (since the PS3/Xbox 360 days, really). Cloth should have distinct textures, metal should shine, and glass should be partially reflective and transparent. You did a bit better on "four-armed", but the material definition on the non-cloth portions is lacking.

    On a similar vein, you can't get away with solid clumps of hair anymore except for stylized designs. Hair - and feathers - need textures that appear to show individual strands.

    Your hands could use some work. Looking closely, I think part of the problem is that they appear to be simply cylinders with rounded ends. It varies from person-to-person, but overall the fingers taper slightly from base to tip, with distinct bulges at each knuckle when viewed from above. When viewed from the side, the top appears mostly straight, but the bottom has a distinct taper. I'd strongly recommend doing a project that focuses entirely upon hands; I think something like Escher's hands would be interesting in 3D:
    DrawingHands.jpg

    Whenever you use somebody's concept, make sure you include an actual link to the project. Just mentioning the artist's name makes things too difficult for the viewer.

    I'm not able to tell from your about section what you want to do. Most of the experience isn't really relevant to an art-related job, and your skills don't point in a specific direction, either - there's no mention of any game engines, for example. I'm personally rather terrible at talking about myself, but it is useful if you can tell people about yourself and what you want to do.
  • Brian "Panda" Choi
    Offline / Send Message
    Brian "Panda" Choi high dynamic range
    @Assani: This is consistent across all your assets, the material definition of your texture work specifically needs work.

    The Kitten, for example, there's no clear definition, especially in specularity, between the metal and the fabric. It overal feels flat, which feels weird still even with the anime-style it is going for.

    Really take the time to polish your existing characters textures.
  • PyrZern
    Offline / Send Message
    PyrZern polycounter lvl 12
    Ok cool. Beauty-shot, got it. Also, will a GIF be nice to have in there ? With turnaround lighting like this.
    FragrantBabyishIrishterrier.gif

    Also, here's the clothing texture. The layout isn't great because I cut out some pieces last minute <_<" But yeah, I think the Spec map is too flat...
    cbf0965ee39e54f05dbf8112beddc476.jpg

    @DWalker Thanks man. Got it. I will only post WIP on my FB or such, but not on my folio. Hair strands >_<" Feels like a shame, now that I think I start to sculpt better hair in ZB. Oh well, there's still 3d print I can do that. I will work more on that, and on the hands too.

    Note to self, post texture map for other projects too.

    Thanks a lot man. I will update the about page as well.

    Well, most likely I gotta look for a new folio site since this one doesn't let me save img or pin stuff... :(

    @JadeEyePanda Thanks man. I will work more on material definition now. When I'm not sure, I'm gonna exaggerate it and see how it goes.
  • BARDLER
    Offline / Send Message
    BARDLER polycounter lvl 12
    Those textures are incorrect for how Marmoset is set up. First and foremost there should be absolutely no lighting information in your albedo texture, by definition that is what an albedo texture is.

    I would highly recommend reading these posts by marmoset, and really understand the information.
    http://www.marmoset.co/toolbag/learn/pbr-theory
    http://www.marmoset.co/toolbag/learn/pbr-practice

    Then from there I would recommend experimenting with some small swatches of different materials on some cubes/spheres. Use the chart on marmoset that gives rough albedo, reflectivity, and roughness values to starting nailing down your material definition. Stick 100% to real world materials, and trying to create them as realistic as you can at first. This should help get you started with pushing your textures to the next level. Then from there you can push the stylization as far as you want.
  • Nosslak
    Offline / Send Message
    Nosslak polycounter lvl 12
    I agree with what the others have said already, but to add to that you should also add your name, URL and potentially e-mail address to all your images as well. That way I can easily get back if I were to save them separately. You can't save them right now as someone mentioned (could still screengrab them), but it's something to keep in mind anyway as people need to be able to revisit your page.
  • LRoy
    Offline / Send Message
    LRoy polycounter lvl 14
    If you're including your AO in your diffuse it shouldn't be black. Colorize it so it works better with your diffuse. I think overall your textures need work. They feel like flat colors with AO laid on top. Skin has a lot of color variation, even when stylized there are warm and cool areas.
  • garriola83
    Offline / Send Message
    garriola83 greentooth
    Aside from your material definitions, your anatomy, especially the face, has opportunities for improvement. I suggest doing a master study of a sculptor, like Michaelangelo, and really take figure out what the master's are thinking when doing their sculpture.
  • PyrZern
    Offline / Send Message
    PyrZern polycounter lvl 12
    Thanks guys ! So many things to improve on, and so little time #_# Bring it on !!

    Question: So, this chart is not the new PBR then ? (Roughness + Metalness). Since Metalness is grayscale, but this chart has Reflectivity with color. This means I have to use Spec + Gloss for this reflective material ?
    materialref02.png
  • BagelHero
    Offline / Send Message
    BagelHero interpolator
    With metalness you just don't need to worry about reflectivity.
    You just tag things as metal (white) and non-metal (Black) and use the time you've saved perfecting your microsurface (gloss/roughness) and albedo.

    That chart is still useful though, for microsurface, which is super important.

    EDIT: I also have comments and crits, just at work right now. Please hold. :poly142:

    EDIT 2:
    Additional map-related comments: No lighting information (AO OR highlights) in albedo, spec or gloss. Things don't get less shiny/reflective where the light hits them less-- the light just hits the same, equally shiny material less. The only situations where this occurs is where there's dirt and grime in crevices.

    Lighting information in the albedo kinda undermines the entire point of PBR. The AO is separate for a reason, and highlights stop looking good in different lighting situations.

    Gloss should be greyscale, not color.
  • Bek
    Offline / Send Message
    Bek interpolator
    If you read the chart it has a key, m = microsurface (gloss). I also believe someone on here said that a lot of the values from those early images were incorrect results from a prototype scanner...?

    pbr does not require metalness, metalness is just a different way to do things with different pros and cons.
  • BARDLER
    Offline / Send Message
    BARDLER polycounter lvl 12
    PyrZern wrote: »
    Thanks guys ! So many things to improve on, and so little time #_# Bring it on !!

    Question: So, this chart is not the new PBR then ? (Roughness + Metalness). Since Metalness is grayscale, but this chart has Reflectivity with color. This means I have to use Spec + Gloss for this reflective material ?
    materialref02.png

    The metalness workflow is just a different way that PBR is implemented in some engines, so the base knowledge and understanding is still the same. The metalness workflow benefits from saving texture memory by basically getting rid of the spec map all together. The final results and the actual shader is basically the same as using a colored spec map.

    The metalness map works by labeling what is metal and not metal on the material, which is a white and black texture. Anything that is metal, will use the information in the albedo map as the spec information, then automatically set the albedo value to 0. Anything labeled non-metal will get an automatic spec value of around .25, because the spec difference between non-metals is so small that this value can just be constant.
  • Avvi
    Offline / Send Message
    Avvi polycounter lvl 3
    Hey, the GIF is a cool idea! Also saves place on the page for other characters :)
  • BagelHero
    Offline / Send Message
    BagelHero interpolator
    Oh, on the gif note, if you can put in custom code, try Gfycat. Converts the gifs to a much faster loading HTML5 vid, you should be able to embed it. :( No non-script options for this though. Just know that gifs are just... huge. Possibly not the best idea if you want a fast page.
  • PyrZern
    Offline / Send Message
    PyrZern polycounter lvl 12
    I couldn't get it to work with Gfycat :(

    Also, guys, thanks for explaining the PBR to me. I think I understand it a bit better now ^^ Gonna have to do some research on my own next !!
  • EarthQuake
    BARDLER wrote: »
    The metalness workflow is just a different way that PBR is implemented in some engines, so the base knowledge and understanding is still the same. The metalness workflow benefits from saving texture memory by basically getting rid of the spec map all together. The final results and the actual shader is basically the same as using a colored spec map.

    The metalness map works by labeling what is metal and not metal on the material, which is a white and black texture. Anything that is metal, will use the information in the albedo map as the spec information, then automatically set the albedo value to 0. Anything labeled non-metal will get an automatic spec value of around .25, because the spec difference between non-metals is so small that this value can just be constant.

    My good sir, thank you for explaining this so I don't have to.

    Pyrzern: Listen to everything this guy is saying, he's giving some great advice. :)
Sign In or Register to comment.